Ecodrain

Parker Zander Condensate Drains

Ecodrain automatic zero-loss condensate drains from Parker Zander

  Models

ED2000 Series

Drag your finger across the table to scroll

Model No. Compressor
Aftercooler
(scfm)
Capacity
Refrigerated Dryer
(scfm)
Filter
(scfm)
Ambient
Temperature Range
(°F)
Max Pressure
(psi g)
Weight
(lbs)
Connections
ED2010-N115 759 1519 7593 35 - 140 232 3.8 2 x 1/2" NPT
ED2010/25-N115 759 1519 7593 35 - 140 362 3.8 2 x 1/2" NPT
ED2010/40-N115 759 1519 7593 35 - 140 580 3.8 2 x 1/2" NPT
ED2010/50-N115 759 1519 7593 35 - 140 725 3.8 2 x 1/2" NPT
ED2010-CO2 759 1519 35315 35 - 140 325 3.8 2 x 1/2" NPT
ED2020-N115 3532 7063 35315 35 - 140 232 5.3 3 x 3/4" NPT
ED2020/25-N115 3532 7063 35315 35 - 140 362 5.3 3 x 3/4" NPT
ED2020/40-N115 3532 7063 35315 35 - 140 580 5.3 3 x 3/4" NPT
ED2020-CO2 3532 7063 35315 35 - 140 325 5.3 3 x 3/4" NPT
ED2060-N115 38846 77692 388461 35 - 140 232 12.8 3 x 3/4" NPT
ED2060/25-N115 38846 77692 388461 35 - 140 362 12.8 3 x 3/4" NPT
ED2060/40-N115 38846 77692 388461 35 - 140 580 12.8 3 x 3/4" NPT
ED2060-CO2 38846 77692 388461 35 - 140 325 12.8 3 x 3/4" NPT

Range of Application
*Referred to 14.5 psi a (1 bar a) and 68°F (20°C) at 102 psi g (7 bar g) working pressure, suction air compressor 77°F (25°C) at 60% RH, air discharge temperature aftercooler 95°F (35°C) pressure dewpoint refrigerated dryer 37°F (3°C).

**Condensate from aftercooler or refrigerated dryer to be drained upstream - only for residual oil content or small quantities of condensate.

Notes:
1. NEMA 4 controls on all models.
2. Based upon standard conditions and must be corrected for higher relative humidity.
3. Add "H" at the end of the Model No. when ordering drain with heater installation (i.e. ED2020-H).
4. Standard version with NPT (N) or 115V/50-60Hz (115) or 24V/DC (24V - Optional) are available.
5. Optional versions with BSP thread (G) or 230V/50-60Hz supply voltage (230V).


ED3000 Series

Drag your finger across the table to scroll

Model No. Compressor
Aftercooler
(scfm)
Capacity
Refrigerated Dryer
(scfm)
Filter
(scfm)
Ambient
Temperature Range
(°F)
Max Pressure
(psi g)
Connections
ED3002N115-K 424 35 - 140 232 3/8" NPT
ED3004N115-K 141 282 1413 35 - 140 232 1 x 1/2", 1/8" NPT
ED3007N115-K 247 494 2472 35 - 140 232 2 x 1/2", 1/8" NPT
ED3030N115-K 1059 2119 10594 35 - 140 232 2 x 1/2", 1/8" NPT
ED3100N115-K 3532 7063 35315 35 - 140 232 2 x 1/2", 1/8" NPT

Range of Application
*Referred to 14.5 psi a (1 bar a) and 68°F (20°C) at 102 psi g (7 bar g) working pressure, suction air compressor 77°F (25°C) at 60% RH, air discharge temperature aftercooler 95°F (35°C) pressure dewpoint refrigerated dryer 37°F (3°C).

**Condensate from aftercooler or refrigerated dryer to be drained upstream - only for residual oil content or small quantities of condensate.

Notes:
1. Standard version with NPT thread (N) or 115V/50-60Hz (24V - Optional).
2. Optional versions with BSP thread (G) or 230V/50-60Hz (230V).


  Features

The removal of condensate by separation, filtration and dryer packages is often a case of using a drain valve. However, most are purchased based solely upon their initial price, with little thought to their maintenance and running costs. The hidden cost with the most common drain types lies within their operation — that is, they discharge expensive compressed air.

Parker Zander ecodrain Zero Air Loss Electronic Condensate Drains detect and discharge condensate only when it is present. With no mechanical sensor parts and a sensing system that works with all types of compressed air condensate, including aggressive oil-free, the intelligent operation always ensures no loss of valuable compressed air.

The ecodrain range is the most reliable, easy to install and cost-effective solution for condensate removal, with a model to suit every system or application.

ED2000 Series

  • For capacities from 13 - 648 scfm (22 - 1101 m3/hr).
  • Maximum pressure of 725 psi g (50 bar g).
  • Saves valuable compressed air.
  • Additional protection with inside and outside powder coating.
  • Robust and high-pressure metal design, which is made of compacted and sealed aluminum.
  • Non-wearing magnetic core level control for optimized and loss-free discharge of condensate.
  • High flow discharge valve.
  • CO2 version available.

ED3000 Series

  • For capacities from 71 to 3532 scfm (121 - 6001 m3/hr).
  • Maximum pressure of 232 psi g (16 bar g).
  • Saves valuable compressed air.
  • Easy installation and servicing.
  • Only one service kit necessary for entire range.
  • Non-wearing magnetic-core level control for optimized and loss-free discharge of condensate.
  • Integrated dirt screen between level measurement and drain valve to protect the diaphragm valve.

  Dimensions

ED2000 Series

Drawing showing the dimensions of ED2010 zero-loss condensate drains from Parker Zander

 
ED2010
4.4 lb (2 kg)


Drawing showing the dimensions of ED2020 zero-loss condensate drains from Parker Zander

 
ED2020
6.3lb (2.9 kg)


Drawing showing the dimensions of ED2060 zero-loss condensate drains from Parker Zander

 
ED2060
20.7 lb (9.4 kg)


ED3000 Series

Drawing showing the dimensions of ED3002 zero-loss condensate drains from Parker Zander

 
ED3002
1.1 lb (0.5 kg)


Drawing showing the dimensions of ED3004 zero-loss condensate drains from Parker Zander

 
ED3004
1.3 lb (0.6 kg)


Drawing showing the dimensions of ED3007 zero-loss condensate drains from Parker Zander

 
ED3007
2.2 lb (1 kg)


Drawing showing the dimensions of ED3030 zero-loss condensate drains from Parker Zander

 
ED3030
2.4 lb (1.1 kg)


Drawing showing the dimensions of ED3100 zero-loss condensate drains from Parker Zander

 
ED3100
3.3 lb (1.5 kg)


  Catalogs

  Contact mdi

Please fill out the form below and your personal mdi product expert will email you your quote. The more information that you provide the quicker we can send you a quote. Sending an incomplete quote request could mean that we have to contact you for necessary information before sending your quote. And know that our knowledgeable sales staff is standing by to help you with your order and with any questions.

In a rush? Use our Quick Contact form to get in touch with us fast!

If you have about five minutes to spare, though, you can save time on the quoting process by filling out the form below.






Please include your contact information so that we may reply to your request. Your contact information is private and will not be sold to any third party or used negatively in any way.







mdi does not advertise prices online. The cost of products is subject to change over time. In order to extend to you the best price that we can offer, we prefer to create written and emailed quotes which reflect any discounts or promotions currently available. Some products can be quoted over the phone, and expediting quotes and orders is always available per request.

See our Terms and Conditions for more information about the mdi sales process.


Call us any time Monday through Friday 7:30 AM to 5:30 PM ET.

Phone: (727) 835-0649 | Toll Free: 800-761-4298
Fax: (813) 571-0422 | Email or Fill Out the Form Above